TRACTOR FRONT END LOADER – PASA SERIES

TRACTOR FRONT END LOADER – PASA SERIES

Pasa Series Tractor Front Loader is produced for tractors less than 75 horsepower. Front loaders are mounted by installing a chassis on the tractor and work by taking power from the tractor’s own hydraulic pump. It is your biggest assistant in your farms, in sectors such as forestry and construction. Thanks to its ADS (active balancing system), it lifts the loader and the attachment at the same angle and provides a great balance.

WHAT IS ADS?
The active balancing system is used to lift the attachment and the loader at the same angle.

Benefits:
-Gives the bucket more picking angle.
-Provides a wider unloading angle.
-Prevents the attachment from jamming during unloading or lifting
-It doesn’t force the chassis and prevents, breaking, bending in a short time.
– It does not give an unnecessary load to the pistons and, extends the piston’s life
– It does not place unnecessary load on hydraulic hoses and valves.
– It does not require the operator to fix the attachment in lowering and lifting. Even if the operator changes, there is no point to pay attention.
– It prevents the load in the bucket or attachment from falling onto the tractor while it is at the top point of loading.
– It allows to take the round bales in the desired position horizontally or vertically.

SUSPENSION TUBES:
-These tubes absorb the impacts and allow stretching.
– It acts as a suspension on damaged or uneven ground, so it does not load the tractor connections and prevents damage to the body and loader connections.

DESCRIPTION TYPE DIMENSIONS
MAX. LIFTING HEIGHT (From the bottom of attachment) MM 3250
MAX. LIFTING HEIGHT (From perno center) MM 3400
LIFTING CAPACITY KG 1300
BEARING CENTER CM 142
BOOM CENTER CM 188
ATTACHMENT PICKING ANGLE AT THE TOP POINT ANGLE 42
UNLOADING ANGLE ANGLE 90
PICKING ANGLE OF ATTCHMENT ON THE GROUND ANGLE 45
PICKING ANGLE OF BUCKET FROM THE INSIDE OF PIT CM 20
WEIGHT OF PASA SERIES KG 530
MIN. REQUIRED TRACTOR HP HP 55-70 HP